Easy MTK Firmware Flashing / Installation Via SP FlashTool

Installing or Flashing your device with a stock firmware is pretty easy and simple using SP FlashTool. This tool works specifically with MTK (Mediatek) devices (G-tide, Gionee, Tecno, etc). If you need help with flashing stock firmware on a different device that doesn't run on Mediatek chipset, please ask in comments.

How To Flash With Sp FlashTool

Step One: Download and install drivers for your device. If you can't find your device driver, us this guide to download and install the driver.

Step Two: Download Sp Flashtool and the your phone's firmware package.

Step Three: Extract Sp FlashTool and your firmware package to different folders

Step Four: Open SP FlashTool folder and launch SP Flashtool.exe as Administrator

Step Five: Click on Scatter-loading, browse and select scatter file from the folder you extracted the downloaded firmware to. (scatter file example: MT6582_Android_scatter.txt) 

Step Six: Click on Download and connect the device to PC via USB cable. Device must be turned off, before attaching to pc.

Step Seven: Once the device is connected to PC, a progress bar will start loading. Wait for it to complete. A green circle with Ok should popup to indicate completion.

Step Eight: Disconnect the device and perform a factory reset before you power on fully.

Done.

If you still have questions, please ask in comments. Need your device stock firmware, request in comments too.