DOWNLOAD SAMSUNG GALAXY NOTE GT-N8020 10.1 FIRMWARE

This stock rom is only for samsung galaxy Note 10.1 and should not be used in another phone.

Make sure your downloading the exact rom for your device, because flashing the wrong firmware can break your phone leaving it completely dead and useless

Samsung Galaxy Note 10.1 Specs

Platform: Android 4.3 (Jelly Bean) S-Pen Stylus TouchWiz UI Processor: 1.9GHz quad-core processor & 1.3GHz quad-core Processor Memory: 3 GB RAM Built-in Storage: 16GB, 32 GB, or 64 GB up to 64 GB microSD memory Rear Camera: 8MP Camera, HD Video, LED Flash Front Camera: 2MP Camera Battery: 8220 mAh Li-Po Battery

How To Use Odin To Flash Samsung Devices

1. Download an install samsung usb drivers from here.

2. Download odin (latest version preferred) from here.

Download the exact rom of your device. 

*Launch odin

*Make sure only Auto Reboot & F. Reset Time is ticked.

*Put your device into download mode by pressing down Volume Down > Home > Power key

Press volume up on the screen that has a yellow triangle to get into odin mode.

*Connect the device to the computer.

*Added!! will be seen showing the device has connected successfully.

*Click on AP (new versions of odin) or PDA (older versions of odin).

*Navigate to the folder containing the rom of the device.

Select the rom. (roms names always end with .tar or .md5).

*Wait for odin to process the rom.

Click start.

*The flashing or upgrading process will now begin.

*A green progress bar will be seen at the top left.

*This process will take about 8 mins or more (depends on the size of the rom.

*When you see PASS! at the top of odin GUI know that you have successfully flashed or upgraded the device

For more Info On How To Flash / Upgrade Samsung Devices Click  HERE

SAMSUNG GALAXY NOTE 10.1 GT-N8020 FIRMWARE

DOWNLOAD-8020UBAMB4_N8020ZTRAMB3_ZTR.zip

DOWNLOAD- N8020XXUDNK1_XSADOA1 - Australia

DOWNLOAD-N8020XXUDNE4_N8020OXADNE4_XEF