[LG G3] This is how to enable DIAG MODE [Marshmellow]
For those who have android 6.0 on G3 and wanted to enable diag for whatever reason like...idk... changing,adding, removing GSM/LTE bands.. where is how.. quick and easy.
1. Download LG United Mobile Driver or LG Mobile Driver. (I don't think it matters.
2. Install it.
3. Go to Device Manager on your Windows Machine.
3. Physically Connect your phone to the computer and set it to CHARGE ONLY (This is necessary).
4. , Then Go to your phone Dialer PAD and type in the code: *#546368#*855# (Replace 855 with the LG G3 model Number - 855 is the international model)
- It should automatically launch you to the hidden Menu.
5. Navigate to USB > PORT CHECK TEST. (Not sure if this is necessary at all...but won't hurt to enable it anyway.. you may skip this or not..it depends..idk)
- Enable it
6. Then Navigate back to USB > QMICMSet
- Click 'OK'. ( Immediately you should see TWO Notifications Display: "LGE Android Phone" Under "Other Devices" with a yellow exclamation.
7. Right Click the SECOND ONE. (Again Not the first one, but the second "LGE Android Phone" Display.
8. Click on "Update Driver Software" > "Browse My Computer for Driver Software" > "Let Me pick From a List of Device Drivers on my computer" >
9. Make sure "Show All Device" is highlighted, then click next. It takes some couple of seconds while to collect all the lists.
- Navigate to "LGE Electronics, Inc" under "Manufacturer" (There are like 4 to 5 of them)
- Then click on the third one.. On the right look for "LGE AndroidNet for Diagnostics Port". - Note: I found mine at the third "LGE Electronics, inc" list...so just keep clicking on them all until you find it.
10. Then Click on it, and it should install the software. Voila.. you should be done and connected.. I have screenshots below..
LEt me know if you encounter any problems.. Cheers!
1. Download LG United Mobile Driver or LG Mobile Driver. (I don't think it matters.
2. Install it.
3. Go to Device Manager on your Windows Machine.
3. Physically Connect your phone to the computer and set it to CHARGE ONLY (This is necessary).
4. , Then Go to your phone Dialer PAD and type in the code: *#546368#*855# (Replace 855 with the LG G3 model Number - 855 is the international model)
- It should automatically launch you to the hidden Menu.
5. Navigate to USB > PORT CHECK TEST. (Not sure if this is necessary at all...but won't hurt to enable it anyway.. you may skip this or not..it depends..idk)
- Enable it
6. Then Navigate back to USB > QMICMSet
- Click 'OK'. ( Immediately you should see TWO Notifications Display: "LGE Android Phone" Under "Other Devices" with a yellow exclamation.
7. Right Click the SECOND ONE. (Again Not the first one, but the second "LGE Android Phone" Display.
8. Click on "Update Driver Software" > "Browse My Computer for Driver Software" > "Let Me pick From a List of Device Drivers on my computer" >
9. Make sure "Show All Device" is highlighted, then click next. It takes some couple of seconds while to collect all the lists.
- Navigate to "LGE Electronics, Inc" under "Manufacturer" (There are like 4 to 5 of them)
- Then click on the third one.. On the right look for "LGE AndroidNet for Diagnostics Port". - Note: I found mine at the third "LGE Electronics, inc" list...so just keep clicking on them all until you find it.
10. Then Click on it, and it should install the software. Voila.. you should be done and connected.. I have screenshots below..
LEt me know if you encounter any problems.. Cheers!
from xda-developers http://ift.tt/2ccBFBy
via IFTTT
posted by kjnb @ September 08, 2016
0 Comments
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home