Download Samsung Galaxy Camera EK-GC100 & EK-GC110 Stock Rom/Firmware

These firmwares are for only samsung galaxy camera EK-GC100 & Ek-GC110 and should not be used in another device, please make sure your downloading the exact firmware for your device because flashing the wrong one can break your phone leaving it completely dead and i won't be responsible for that.

SAMSUNG GALAXY CAMERA EK-GC100 STOCK FIRMWARE

Android 4.1.2 Jelly Bean

GC100XXBMC4_OJVBMB1_Arabic

DOWNLOAD FIRMWARE

GC100XXBMD1_OXABMD1_BTU_UK

DOWNLOAD FIRMWARE

*************************************

SAMSUNG GALAXY CAMERA EK-GC110 STOCK FIRMWARE

Android 4.1.2 Jelly Bean

GC110XXAMC2_OXXAMC1_XEF_France

DOWNLOAD FIRMWARE

HOW TO FLASH THIS DEVICE

Download an install samsung usb drivers from HERE.

Download odin (latest version preferred) from HERE

Launch odin

Make sure only Auto Reboot & F. Reset Time is ticked.

Put your device into download mode by pressing down Volume Down > Home > Power key

Press volume up on the screen that has a yellow triangle to get into odin mode.

Connect the device to the computer.

Added!! will be seen showing the device has connected successfully.

Click on AP (new versions of odin) or PDA (older versions of odin).

Navigate to the folder containing the rom of the device.

Select the rom. (roms names always end with .tar or .md5).

Wait for odin to process the rom.

Click start.

The flashing or upgrading process will now begin.

A green progress bar will be seen at the top left.

This process will take about 8 mins or more (depends on the size of the rom.

When you see PASS! at the top of odin GUI know that you have successfully flashed or upgraded the device

The device will reboot.

First boot after this process takes time. about 10min

Do a factory reset if phone bootloops.

Press Volume up > Home > Power key

Select factory reset.