DOWNLOAD SAMSUNG GALAXY NOTE 3 NEO DUOS SM-N7502 & NEO SM-N7505 STOCK ROM/FIRMWARE

GALAXY NOTE 3 NEO SM-N7505 FIRMWARE

4 Files Repair Firmware Android 4.4.2 KitKat

N7505XXUCNH1_OXECNH1/SIZE:1.31GB

DOWNLOAD FIRMWARE

------------------------------------------------------

Android 4.4.2 KitKat

N7505XXUCOE1_OXECOE1_SER - Russia

DOWNLOAD FIRMWARE

------------------------------------------------------

Android 4.4.2 KitKat

N7505XXUCNH1_OJVCNH2 - Arabic

DOWNLOAD FIRMWARE

------------------------------------------------------

Android 4.4.2 KitKat

N7505XXUCNG5_DBTCNG1 - Germany

DOWNLOAD FIRMWARE

-----------------------------------------------------

GALAXY NOTE 3 NEO SM-N7505 LOLLIPOP VERSION 5.1.1

Android 5.1.1 Lollipop

N7505XXUDPB1_OXXDPB2_ROM - Romania

DOWNLOAD FIRMWARE

------------------------------------------------------

Android 5.1.1 Lollipop

N7505XXUDPB1_OXEDPA1_SER - Russia

DOWNLOAD FIRMWARE

------------------------------------------------------

Android 5.1.1 Lollipop

N7505XXUDPB1_NEEDPC1 - Nordic

DOWNLOAD FIRMWARE

-----------------------------------------------------

Android 5.1.1 Lollipop

N7505XXUDPB1_ITVDPB1 - Italy

DOWNLOAD FIRMWARE

----------------------------------------------------

Android 5.1.1 Lollipop

N7505XXUDPB1_DBTDPB1 - Germany

DOWNLOAD FIRMWARE

SAMSUNG GALAXY NOTE 3 NEO DUOS SM-N7502 FIRMWARE

N7502XXUANC3_N7502OJVANC2_XSG

DOWNLOAD FIRMWARE

N7502XXUANC4_N7502OLBANC2_THL

DOWNLOAD FIRMWARE

N7502XXUANH1_N7502ZTOANH2_ZTO

DOWNLOAD FIRMWARE

N7502XXUANH2_OLBANH1 - South East Asia

DOWNLOAD FIRMWARE

HOW TO FLASH THIS DEVICE

Download an install samsung usb drivers from HERE.

Download odin (latest version preferred) from HERE

Launch odin

Make sure only Auto Reboot & F. Reset Time is ticked.

Put your device into download mode by pressing down Volume Down > Home > Power key

Press volume up on the screen that has a yellow triangle to get into odin mode.

Connect the device to the computer.

Added!! will be seen showing the device has connected successfully.

Click on AP (new versions of odin) or PDA (older versions of odin).

Navigate to the folder containing the rom of the device.

Select the rom. (roms names always end with .tar or .md5).

Wait for odin to process the rom.

Click start.

The flashing or upgrading process will now begin.

A green progress bar will be seen at the top left.

This process will take about 8 mins or more (depends on the size of the rom.

When you see PASS! at the top of odin GUI know that you have successfully flashed or upgraded the device

The device will reboot.

First boot after this process takes time. about 10min

Do a factory reset if phone bootloops.

Press Volume up > Home > Power key

Select factory reset.