How To Use RockChip Batch Tool To Flash Android Devices

Before we continue/showing you how to use this software,Rockchip tool helps you to flash rockchipset mobile or tablet, RockChip Batch Tool is also used to flash or upgrade devices with RK SoC like PiPo Tablet PC, Android you will be able to flash/upgrade any android with rockchipset without any restrictions.

HOW TO USE ROCKCHIP

Step 1: Download and install RockChip USB drivers from HERE

Step 2: Download and extract the latest version of RockChip batch tool from HERE

Step 3: Run RKBatch Tool from inside the extracted folder

Step 4: Click the Browse button on FW Path

Step 5: Go to the folder containing the firmware of the device you want to flash or upgrade

Step 6: RockChip batch tool will now load the firmware selected. when you see loading firmware complete, it simply means the firmware has been loaded successfully.

Step 7: After doing the above step turn off the device then press and Hold volume up button and connect it to PC.
NOTE: Keep holding the volume up button until Rockchip batch tool detect the device ie under connected devices, you will see a Green icon showing its connected.

Step 8: Once connected, Click on Restore button for flash process to start.

The Firmware flashing might take about 10 minutes to complete depending on the size of the firmware your flashing...so relax and wait for it to complete the process

Step 9: Flashing process will complete when you see Upgrade Done Success. Device will reboot. Thats all....

if you encounter any problem while doing this you can drop it in the comment box below.

DOWNLOAD ROCKCHIP v1.8.0

Rockchip Batch Tool has been updated to version 1.8 to handle new devices based on new Rockchip RK3288 CPU. This new version also contains update drivers for both X86 systems and 64 bits Windows systems.

DOWNLOAD ROCKCHIP v1.7.0