[TUT] How to fix bootloop O+360 Extreme via SPFT

[TUT] How to fix bootloop O+360 Extreme via SPFT

O+ 360 Extreme specs:

5.5-inch HD (1280×720) IPS display
1.7GHz MediaTek MT6592 octa-core processor
2GB RAM
Expandable 16GB internal storage
Supports up to 32GB MicroSD card
13MP rear camera with flash
8MP front camera with flash
Dual-SIM (MicroSIM + Regular)
3G/HSPA+
Bluetooth, Wi-Fi
2400mAh battery
Android 4.4 Kitkat
Dimension: 154 x 79 x 7.8mm
Weight: 152g

Requirements:

PC

USB Cable

Download Links:
Mediatek VCOM Drivers:

- Click Here

SP Flash Tool:

Click Here

O+360 Stock rom
Click Here

 Instructions

1. Download all necessary files and Enable USB Debugging mode in your phone..

2. Install Drivers USB_VCOM_Driver.rar

In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.

Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.

3.  Now Click on Next and select Install this driver software anyway and wait for finishing the process.

4.  After installation is finished then Restart your computer, That's it.

5. Open flash_tool.exe, click on the Download Tab
 Extract the downloaded O+360 Extreme stock rom to the new folder you created.

6. Click Scatter-loading and browse for the scatter file (MT6592_Android_scatter)

7. Make sure flashing mode is set to "Download Only" and check mark all except Preloader.

8. Click Download.

9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.

10. Green Circle image will show once flashing is completed.