How To Use GPG Dragon To Flash / Upgrade Spreadtrum Devices With PAC or BIN File

Hey guys today am going to show you how to use Gpg dragon to flash to flash/upgrade spreadtrum devices

>>Download and Install Spreadtrum USB Driver on your Computer.

Download an install spreadtrum drivers HERE

Download and extract gpg dragon from HERE

>Launch GPG Dragon
>Click on Spreadtrum Tab
>Tick WriteFlash
>Under Mobile Option, Select 6280_Android or 8810_Android
>Click the button with 3 dots [...] near C:\Temp_File.bin bar
>Select the pac or bin file you want to flash
>Click Start Button
>You will see Scanning USB Port
>Connect the spreadtrum device you want to flash to PC while holding volume down button
>GPG Dragon will Read the phone info and the pac or bin file info then you will see a message Waiting for your confirmation...
>Tick the partitions you want to flash and select OK (do not untick anything if you want to do full flash)
>You will see a purple progress bar with percentage completed.
>When flashing is complete, you will see a message All Done!
>You can now disconnect the device and reboot.

For those who want to remove pattern lock or Google account but too scared to do a full flash, just tick only UserData and flash

credit: romkingz