Thursday, December 31, 2015

[TUT] How to Fix Bootloop/Hardbrick of CherryMobile Flare S4

How to Fix Bootloop/Hardbrick of CherryMobile Flare S4

Hi this tutorial teach you on how to fix bootloop or deadboot for the device CherryMobile Flare S4
with chipset of mt6753 running in Lollipop 5.1. This stockrom compiled by Denielle Cruz has already Rooted and built-in CWM. Just follow this tutorial carefully.

Cherry-Mobile-Flare-S4 bootloop



Note:  I'm not liable for any damage for your device by proceeding this you accept any liabilities.
Do it at your own risk!


Requirements:
Mediatek_Auto_Drivers.zip
USB_VCOM_Driver.rar
MediaTek_SP_Flash_Tool_V5.1532.00.zip
Rooted_Stock_Rom_with_CWM.zip

 Instructions:
1. Installing Drivers
1.) Download Mediatek Auto Installer and Extract:

Driver Auto Installer
1.1)Just choose your Operating System Win 7/Win8
driver for win7


2.) For Win 10
Install Drivers USB_VCOM_Driver.rar
In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.

Driver Installing
Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.

Driver Location

3.  Now Click on Next and select Install this driver software anyway and wait for finishing the process.

driver installed

4.  After installation is finished then Restart your computer, That's it.
5. Open flash_tool.exe, click on the Download Tab
 Extract the downloaded Stock rom to desktop of your computer.
SPFT LOCATE SCATTER

6. Click Scatter-loading and browse for the scatter file (MT6753_Android_scatter)
7. For Bootloop only
 Make sure flashing mode is set to "Download Only" and check mark all except Preloader.
Note: If deadboot/hardbrick set "Download+Format" and check Preloader.
8. Click Download.
MT6753 SPFT

9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.
10. Green Circle image with check will show once flashing is completed. That's it!

SPFT SUCCESS

11. Disconnect your phone in USB cord then open if still bootloop then try to factory reset in recovery settings. To go in recovery mode reboot your phone hold and press power on and volume up simultaneously until recovery mode appeared.




Disclaimer:
Please give proper credits and do not reupload. Instead share this link. Thank You!


Special Thanks:
Denielle Cruz for all the files

Credits:
Denielle Cruz
http://Androidcribs.com
Mtkdroidtools




Labels: , , ,

0 Comments:

Post a Comment

Subscribe to Post Comments [Atom]

<< Home