How to flash stock rom Myphone My28s and openline using PC

How to flash stock rom Myphone My28s and openline using PC

Download all: 

1.FirmwareMy28s: Click Here
Mirror Link(NO PASSWORD)

2. Upgrade Download Tool: Click Here

3. SPRD NPI USBDriver: Click Here

1st password: PM me sa Password

2nd password: Salamat po

HOW TO FLASH?

1. Open SPRD NPI USB Driver > Production Line Version >Choose "amd64" if you're using 64 bits * choose x86 if you're using 32 bits (After this steps install the driver that compatible in your PC)
2. Open Upgrade Download (You can locate it in the SPRD Upgrade Tool Folder)
3. After you open Upgrade Download, Click LOAD PACKET
4. Then find the extracted folder ofMyPhone_My28s_Openline_Firmware_v1 and click the pac file (Wait for a few seconds until the pac file will load)
5. After the pac file will load, click the START DOWNLOADING (Parang Arrow)
6. REMOVE your battery and insert it back
7. Hold Vol + and Vol - together, then connect the USB Cable into the PC.
8. If you can see "IN PROGRESS" in the Upgrade Download Tool, you can release the Vol + & -
9. It will flash and just wait for a few minutes (It takes 3 - 5 minutes, so be patience)
10. When the flashing is "PASSED" It means you made it :D
11. Remove your device in PC.
12. Remove Battery and Insert it Back
13. Go to RECOVERY MODE (Hold Power Button + Volume UP, Dapat una mo ma hold yung power button then hold mo din agad yung volume up. Take note, dapat nka hold na power at yung volume up sa hindi pa lalabas yung mapa or hindi pa mag vibrate yung device mo)
14. Do a Wipe Data/Factory Reset (After wiping, please REBOOT your device)
15. Wait 5-10 minutes to boot your device. (1st time boot, matagal talaga pero 2nd time and so on hindi na)
16. *Then if you're in SYSTEM now, may Kingroot na yan na naka install (Pre-Rooted kasi yung firmware kaya may root access kana agad. Open mo lang yung Kingroot, pwede ka na din mag debloat ng apps)

CREDITS to all Team28Devs

Klark Luis Peralta

Popoy Fernandez

Risty John Ababa

MyPhone My28 & MyPhone My28s (OFFICIAL GROUP)

How to Flash Stock ROM and Openline My28 (.pac flashing method) using PC

How to Flash Stock ROM and Openline My28 (.pac flashing method) using PC

Download this firmware: 

1. MyPhone My28 Smartlock (Openline) Firmware by Team28DEVS

Click Here

2. Upgrade Download Tools:
Click Here

3. SPRD NPI USB Driver:
Click Here

AFTER YOU DOWNLOAD ALL THIS LINK, EXTRACT IT USING WINRAR.

=========================================================================

HOW TO FLASH?

1. Open SPRD NPI USB Driver > Production Line Version >Choose "amd64" if you're using 64 bits * choose x86 if you're using 32 bits (After this steps install the driver that compatible in your PC)
2. Open Upgrade Download (You can locate it in the SPRD Upgrade Tool Folder)
3. After you open Upgrade Download, Click LOAD PACKET
4. Then find the extracted folder of MyPhone My28 Smartlock (Openline) Firmware by Team28DEVS and click the pac file (Wait for a few seconds until the pac file will load)
5. After the pac file will load, click the START DOWNLOADING (Parang Arrow)
6. REMOVE your battery and insert it back
7. Hold Vol + and Vol - together, then connect the USB Cable into the PC.
8. If you can see "IN PROGRESS" in the Upgrade Download Tool, you can release the Vol + & -
9. It will flash and just wait for a few minutes (It takes 3 - 5 minutes, so be patience)
10. When the flashing is "PASSED" It means you made it :D
11. Remove your unit in PC and Manually Reboot your device.
12. Wait 5-10 minutes to boot your device. (1st time boot, matagal talaga pero 2nd time and so on hindi na)
13. Then if you're in SYSTEM now, try to Install Kingroot Apk (Pre-Rooted kasi yung firmware kaya may root access kana agad kung ma install mo yung Kingroot)
14. Problem in INSERT SIM? (Reboot lang ng reboot hanggang sa babalik yung signal, bugged po kasi yan ng My28, at hindi lang ang My28 ang may problema na ganyan pati din sa My27 ganyan din so salamat sa pag intindi)

============================================================

Watch Video in Youtube for Tutorial

N O T E: This firmware is not applicable for My28s. Hindi namin alam kung working ba sya sa My28s or hindi, baka kasi ma ano pa yung unit niyo, kaya TAKE RISK kung gusto niyo e try. Basta yung suggest namin mga Team28Devs is don't try it muna kasi di pa namin subok yan. (TRY IT IN YOUR OWN RISK)

============================================================

Credits to all my CO - TEAM28DEVS
 Risty John Ababa
MyPhone My28 & MyPhone My28s (OFFICIAL GROUP)

How to fix Low Signal for My28 and My28s & Unlocking/Openlining via Terminal Method using Phone

NOTE: APPLICABLE ETO SA MGA NAKAPAG OPENLINE USING FIRMWARE AT PWEDE DIN ETO GAWIN PANG OPENLINE.

• DO THIS AT YOUR OWN RISK 

NOTE: YOU MUST ROOT YOUR DEVICE BEFORE DOING THIS, USE KINGROOT.

• Bago ang lahat, mag-backup muna ng inyong IMEI. Just in case na mabago ang IMEI niyo.

 1. Open Dialer and dial this codes *#*#83781#*#* (Engineer Mode)2. Go to Telephony --> Set IMEI3. Copy your Sim1 and Sim2 IMEI on a piece of paper. (Kung nagbago yung IMEI niyo at nawala yung box, pwede niyo din e check yung default IMEI niyo sa likod ng phone, tanggalin lang ang battery at makikita niyo yung IMEI ng Sim1 and Sim2)  

=========================================================

• REQUIREMENTS

1. Terminal Emulator (download on Playstore)
2. FIX OPENLINE.rar
3. Common Sense

• After downloading FIX OPENLINE.rar, extract it using RAR, 7zip, etc.. 
• Open the extracted folder and you can see, wcnfixnv1.img, wcnfixnv2.img, wfixnv1.img, wfixnv2.img.
• Copy those 4 files and put it in the root of your SD Card. (Wag niyo silang ilagay sa kahit anong folder, MALIWANAG?)

=========================================================

FOLLOW THIS SIMPLE STEPS (COMMON SENSE BARELY NEEDED)

1. Open Terminal Emulator
2. Type su (after press enter may lalabas na "#" sign)
3. Type ( dd if=sdcard/wfixnv1.img of=dev/block/mmcblk0p5 ) tapos enter, may lalabas na message at babalik yung "#" sign 
   
4. Type ( dd if=sdcard/wfixnv2.img of=dev/block/mmcblk0p6 ) tapos enter, may lalabas na message at babalik yung "#" sign
   
5. Type ( dd if=sdcard/wcnfixnv1.img of=dev/block/mmcblk0p10) tapos enter, may lalabas na message at babalik yung "#" sign
   
6. Type ( dd if=sdcard/wcnfixnv2.img of=dev/block/mmcblk0p11) tapos enter, may lalabas na message at babalik yung "#" sign
   
7. Type ( reboot ) tapos enter para mag reboot yung device.

  8. Check your IMEI. 

  8.1 Open Dialer and dial this codes *#06#

Kung nabago ang inyong IMEI, then Go back to Engineer Mode and restore your original IMEI

NOTE: APPLICABLE ETO SA MGA NAKAPAG OPENLINE USING FIRMWARE AT PWEDE DIN ETO GAWIN PANG OPENLINE.

HIT LIKE & THANKS :D

#Team28Devs

Credits:

Risty John Ababa

MyPhone My28 & MyPhone My28s (OFFICIAL GROUP)