How to Install Stock ROM on Archos ALBA 8 V3| for stock rom go to rompure.com

Official Firmware for Archos ALBA 8 V3-

official Stock Firmware ROM now available for Archos ALBA 8 V3, in this article i will Show you how to install Stock ROM on Archos ALBA 8 V3,

this is a latest build of Official Stock ROM firmware flash file for Archos ALBA 8 V3, you can install this ROM on Archos ALBA 8 V3 using Below Guide which is based on SP flash tools, The Archos ALBA 8 V3 is Run on Android 7.0 OS  Powered by Mediatek MT8163 Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include Proximity sensor, Accelerometer andAmbient light sensor.

Flashing The official Stock Rom onArchos ALBA 8 V3 will Erase all your Personal data and you are back on Stock So Create a backup before Doing Anything,Follow Below Step by Step guide to Install Official Rom on Archos ALBA 8 V3,

Firmware Details-

1Device- Archos ALBA 8 V3

1OS- Android 7.0

1Chipset- Mediatek MT8163

1version- Archos ALBA 8 V3 - ac80cplv3-user 7.0

1Language- English/multi

1Gapps- included

1Root Access- Not

Note- 

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process

Download tools & ROM For Archos ALBA 8 V3-

File Name	Downloads
SP flash tools V5.2XX	Download
Stock Rom Archos ALBA 8 V3	Download
Vcom Driver [Latest]	Download

How to Install Stock Rom on Archos ALBA 8 V3- 

Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.Install correct adb and Vcom Driver in your PC from above link[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.Go to extracted SP tools folder and Run SP flash tools exe file.{extracted In Above Steps]

Step 5.in SP tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.

Step 6.select what you want flash, Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into PC using usb.{if Not Detect then insert battery and connect}[if the battery is non Removable switch off phone and connect with battery]

Step 8.wait while flashing is complete it take a few minut to flash after success.insert battery and you are done switch on your smartphone.

Search tag-

• firmware Archos ALBA 8 V3, flash file Archos ALBA 8 V3, cara unbrick Archos ALBA 8 V3, Archos ALBA 8 V3 para install firmware, Archos ALBA 8 V3 flash file download, Archos ALBA 8 V3 official firmware update, Archos ALBA 8 V3 tablet FRP unlock reset firmware download,

Lineage OS 14 Custom Rom For Xiaomi MI 6 [sagit]| for stock rom go to rompure.com

Lineage OS 14 Custom Rom For Xiaomi MI 6, This Rom work smooth, great and can be used for daily drive, download flash and enjoy this enjoy this wonderful ROM Special thanks to our Dev that made this ROM work for Xiaomi Mi 6. 

 Prerequisites:

• This Android ROM is meant for only Xiaomi Mi 6
• Your phone should have a custom recovery installed to install this ROM on your phone.
• We will be using TWRP Recovery for flashing this ROM.
• This ROM will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
• Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
• Don’t worry we are going to share step by step guide to safely

What’s working:

• Boots
• RIL (Calls, SMS, Data)
• Wi-Fi
• Bluetooth
• Video Playback
• Audio
• Camera
• Sensors
• LED
• GPS

Known issues:

• file based encryption
• fpc fingerprint sensor
• Ambient display
• Others I don’t currently know…

Follow our guide below to download the Rom and install it yourself.

How To Lineage OS 14 For Xiaomi MI 6

1. Download the ADPT OS Rom to your computer or device.
2. Connect and mount your device USB memory on your computer using the USB cable.
3. Now copy/paste the downloaded Android ROM zip file and Google Apps.zip files to your SD card. Make sure the files are in the SD card root (not in any folder).
4. Then turn OFF your phone and disconnect from the USB cable.
5. Now boot into the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together
6. Once you are in Recovery Mode, select perform a full data wipe by selecting “wipe data/factory reset”. Use the Power button to select everything while in the Recovery Mode.
7. Then, perform a cache wipe by selecting “wipe cache partition”.
8. Now, this is optional, but it is recommended to perform a wipe of your Dalvik cache as well. You will not get into boot loops or any other errors. From recovery, go to ‘advanced’ and then select “wipe Dalvik cache”.
9. Then go back to the main recovery screen and select “install zip from SD card”.
10. Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 7.1.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
11. Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.
12. After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.

Your Xiaomi  Mi 6 will boot now and it might take about 5 minutes to boot up on your first time. So, please wait. Your Xiaomi Mi 6 should now haveLineage OS 14 For Xiaomi MI 6 installed on It! Go to Settings & About phone to verify.

Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

Credits –
@Porter
@Androidvillaz

Download Link

Lineage OS 14 Xiaomi MI 6

Gapps

Tecno Camon CX Air Stock Rom Download| for stock rom go to rompure.com

If you are in search of stock rom firmware for your Tecno Camon CX Air smartphone, then you are in the right place. Having your device stock rom is very essential as it helps in fixing extreme errors such as unbricking your bricked phone, fix bootloop problem, fix bugs and unroot, upgrade and downgrade, etc... Aside from fixing errors, flashing your device firmware helps in regaining lost warranty.

YOU MAY LIKE

Tecno Camon CX Stock Rom

Tecno Camon CX Air Key Specification

• 5.5-inch IPS Display, 720 x 1280 pixels (267ppi)
• 1.25GHz quad-core Mediatek MT6737 CPU with 2GB RAM
• Android 7.0 (Nougat) with HiOS 2.0
• 16GB Storage with support for memory card up to 128GB
• 13MP Rear Camera and 13MP Front Camera
• 4G LTE (up to 150Mbps)
• Fingerprint Sensor (Rear)
• 3200 mAh Battery with Fast Charging

Download Link

Download Tecno Camon CX Air Stock Rom

How To Update Galaxy S6 edge - SM-G925F to Official Nougat 7.0 XXU5EQBG Firmware.| for stock rom go to rompure.com

Samsung today has Started Rolling out a New Android 7.0 Nougat firmware update to the Samsung Galaxy S6 edge - SM-G925F.

The New Software Update brings Android 7.0 Nougat experience along with more Further improvements to performance as build number G925FXXU5EQBG and it is recommended that those who own the Galaxy S6 Edge devices should definitely install this update.

Follow Our Guide Below to Download the Update and Install it Yourself.

The Update brings the following changes:

•Android 7.0 Nougat
•The security of your device has been improved.
•Device stability improvements, bug fixes.
•New and / or enhanced features.
•Further improvements to performance.

»Firmware Details:

Model	SM-G925F
Model name	Galaxy S6 edge
Country	United Kingdom (Vodafone)
Version	Android 7
Changelist	10789740
Build date	Sat, 25 Feb 2017 10:36:15 +0000
Security Patch Level	2017-02-01
Product code	VOD
PDA	G925FXXU5EQBG
CSC	G925FVFG5EQBG

How To Update Galaxy S6 edge - SM-G925F to Official Nougat 7.0 XXU5EQBG Firmware:

Download Galaxy S6 edge - SM-G925F
Nougat 7.0  G925FXXU5EQBG Firmware .

1- Extract (unzip) the firmware file.

2- Download Odin v3.11.1

3- Extract Odin ZIP file

4- Open Odin v.3.11.1

5- Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)

6- Connect phone and wait until you get a blue sign in Odin

7- Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked

8- Click the start button, sit back and wait few minutes.

That’s it! Your Galaxy S6 edge - SM-G925F
should now have Android 7.0 Nougat XXU5EQBG  on your phone! Go to Settings > About phone to verify.

for stock rom Samsung Galaxy S6 Edge Updates Keep Checking Android Custom ROM Fix ™®

That’s all. We hope this guide serves you well. If there’s anything you’d like to be added/changed on this page, PLZ Use the comment box below to contribute more ideas & Suggestions .

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

Gionee P3S Custom Rom: CM12.1 ROM For Gionee P3S| for stock rom go to rompure.com

CM12.1 ROM For Gionee P3S is now available for Gionee P3S Users.

Prerequisites:
•This Android is meant for only Gionee P3S.
•Your phone should have a custom recovery installed in order to install this ROM on your phone.  Twrp Recovery For Gionee P3S
•We will be using Twrp Recovery for flashing this Rom
•This ROM will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
•Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.

•Don’t worry we are going to share step by step guide to safely

Disclaimer:
This site or the developers are not responsible if you damage or brick your device. Do it at your own risk and follow the instruction properly.

Follow our guide below to download the Rom and install it yourself.

How to Flash CM12.1 ROM On Gionee P3S

1.   Download Rom  and gapps to your computer or Phone
2. If downloaded with computer connect your device via USB and send to the root of your Sd, or you downloaded the ROM with your device move the downloaded CM12.1 ROM to the root of your Sd card.
3. Switch Off your device. 
4. Now  Boot into Recovery Mode.
5. Once you in Twrp Recovery Mode, click on "Backup" Tick all the option then slide the Swipe to Backup button to start the backing-up your previous Rom (Very Important).
6. After The Backup Process is done go to the main menu click on "Wipe" then click on "Advance Wipe" Now tick this option Dalvik, System, Cache, and Data.
7. Slide the "Swipe to Wipe" button to starting the wiping process.
8. Now click Install select the CM12,1 ROM and click more to select the Gapps file so it will flash the both zip without you selecting the gapps after flashing the main ROM.
9. Tick✔ the option "Reboot after installation is complete" After the ROM is done installing it will reboot itself.
10. First boot will take about 5 minutes to boot up. So be patience

After the boot up is done Your Intex Aqua Freedom Should now has the CM12.1 ROM Installed on it.

Please do share this post with your friends on Facebook, Google + and Twitter

Credit

Emmanuel

Aryan Rockstar

CM12.1 ROM For Gionee P3S
Gapp

How to Update Nexus 6P to Official Nougat 7.1.1 N4F26T Factory Image (Security Patch)| for stock rom go to rompure.com

The Newer firmware for Nexus 6P is a part of monthly builds that Google announces with a newer security patch. Apart from security fixes, not much would be changed. However, updating to it is crucial as it assures you utmost reliability and security. To update your Nexus 6P to Android 7.1.1 N4F26T Nougat firmware, kindly read below. If you want to go the OTA(Over-the-air) route, you might not find this update yet due to region difference but this manual guide addresses all and has no wait to it.  You can manually update Nexus 6P to Android 7.1.1 N4F26T factory image Via This Easy Tutorial.

Prerequisites:

•This tutorial is only for Huawei Nexus 6P and we are not sure if it will work on the other variants of the Nexus 6P on other carriers.

•Your phone can be on any previous Android version or even on a custom ROM. It doesn’t matter at all. This tutorial will still work for installing Android 7.1.1 Nougat.

Disclaimer

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

How to Update Nexus 6P to Official Nougat 7.1.1 N4F26T Factory Image (Security  Patch)

Step 1 – Download Android 7.1.1 Factory Image (angler-n4f26t-factory-50ddc702.zip) for Nexus 6P on your PC, if you haven’t already.

Step 2 – Connect your Nexus 6P to your computer using the USB cable.

Step 3 – Please make sure Fastboot is configured and properly installed on your computer. .

Step 4 – Turn OFF your phone.

Step 5 – Get into the Fastboot/Bootloader Mode on your phone. Turn ON the phone while pressing and holding the Volume Up + Volume Down + Power buttons till you see the Fastboot menu and START on top.

Step 6 – Now extract the downloaded file anywhere in your computer. Go to the folder angler-N4F26T and then copy/paste all the files to your Fastboot directory.

Step 7 – From the factory image files in your Fastboot directory, do the following depending which OS you are on:

•On Windows: Run the file “flash-all.bat”.
•On Mac: Run the file “flash-all.sh” using Terminal.
•On Linux: Run the file “flash-all.sh”.

Step 8 – That’s pretty much that you had to do for flashing the stock factory image on your Nexus 6P. Now wait and watch as the process is completed — or follow the on-screen instructions on your phone if in case you have to unlock the bootloader.

Step 9 – After the installation completes, the phone will boot now and it might take about 5 minutes to boot on your first time. So, please wait with patience!

That’s it! Your Nexus 6P should now have the official Android 7.1.1 N4F26T Nougat software update installed on your phone using the stock factory image from Google! Go to Settings >About phone to verify.

[ROM]Cyanogenmod 14.1 For CherryMobile Android One G1 (Seed)

[ROM]Cyanogenmod 14.1 For CherryMobile Android One G1 (Seed)

Special boot modes:
Recovery: With the device powered off, hold Volume Up & Power
Bootloader: With the device powered off, hold Volume Down & Power
Fastboot: With the device powered off, hold Volume Down & Power

Known Issues:
To see a list of known issues, or to submit an issue, visit the Known Issues page for the Android One 2nd Gen.
Find help online

You may find assistance with the Android One 2nd Gen on Internet Relay Chat or on the CyanogenMod forums.

Downloads: [Link ##download##]

Maintainers:
The following people are maintainers for this device: arvinquilao

[ROM] MIUI 8 6.11.24 For Flare X_V3 [MT6753]

[ROM] MIUI 8 6.11.24 For Flare X_V3 [MT6753]

FEATURES:

Highlights New - Swipe to delete Lock screen notifications (11-18) New - Home screen settings added to the Settings (11-22) New - All-new playlists (11-22) Optimization - Redesigned content layouts (11-22)

System Optimization - NFC battery issues (11-23) Optimization - Fingerprint recognition accuracy (11-23) Fix - Volume in earphones was too high for ringtones and notifications (11-23)

Messaging Optimization - Verification codes are highlighted among unread notifications (11-22) Optimization - Delivery Company names are displayed on the cards (11-22)

Lockscreen, Status Bar, Notification Bar New - Swipe to delete Lock screen notifications (11-18) new - Fingerprint can be used as the Privacy protection password (11-21) Optimization - UI adjustments for screen lock, password, and fingerprints (11-21)

Home screen New - Home screen settings added to the Settings (11-22)

Music New - All-new albums (11-22) Optimization - In-app downloads (11-22)

Backup Fix - Mi Mover FC issues (11-22)

Weather Optimization - Redesigned content layouts (11-22) Fix - Status bar and Home screen couldn't monitor updates (11-22) Fix - High battery consumption on standby in Airplane mode (11-22) Fix - FC issues in some cases (11-22)

Settings Optimization - Alerts for factory data reset to avoid unintentional data loss (11-18)

MI Wallet New - WeChat payments for Mi Credits (11-22) Fix - Mi Pay logo adjustments (11-22) 

STATUS: Stable Bugs: - (?) 

DOWNLOAD: [Link ##download##]

CREDITS:
Janric Vicedo (The One Who Originally Port This!)-MIUI
Knight Owls Porting Assassins-MultiROM
Redmi Note 2-Sir yow Bushkie Gallano

(ROM) Flare X / Jiayu S3 6752 - 7.1.1 PixelMod-1

(ROM) Flare X / Jiayu S3 6752 - 7.1.1 PixelMod-1

Base ROM: jiayu_s3-7.1.1-20161207 (M.A.D.) Stable 4

Gapps: 7.1 pico

ROM Features:
Round moded icons (system integrated)
Viper4Android 2.5.5
Dolby Atmos
Init.d support (Rom & Boot.img)
Rooted
Busybox installed
Deknoxed
Zipaligned
Pre-installed Init.d Tweaks
*Enable GPU for 2D operation
*Improve battery life
*Move dalvik-cache to cache
*Improve internet speed
*Improve touch
Pixel Launcer plus wallpaper
Dark Pixel bootanimation
Google assistant enabled

Flashing Instruction:
Boot to custom recovery (I used TWRP Gold 3.0.2-3)

Link: [TWRP_3.0.2-3_gold_JDG ##download##]

Backup existing ROM is optional
Wipe factory reset
Flash the ROM (Flare_X_7.1.1_Pixel_MOD1.zip)

Link: [Flare_X_7.1.1_Pixel_MOD1 ##download##]

Wipe dalvik-cache & cache
Reboot to system
Enjoy...

Credits:
MAD Team
Flare X Admins

Screenshots: (Do your own)

Bugs: ?????? 
baygon ang katapat

Note: if you get fc when opening wifi settings, you may flash this:

[Link ##download##]

[ROM][MT6753] MIUI 8 6.12.1 For Firefly Intense Desire

[ROM][MT6753] MIUI 8 6.12.1 For Firefly Intense Desire

KNIGHT OWLS PORTING ASSASSINS·TUESDAY, DECEMBER 6, 2016

MIUI 8 China Developer ROM 6.12.1 Full Changelog

Highlights:
New - "People who look alike" in Gallery (11-29)
Optimization - Apps sorted by frequency before they are deleted (11-29)
Lockscreen, Status Bar, Notification Bar
Optimization - Changed icons for USB charging and switching keyboards (12-01)
Fix - The first notification couldn't be removed by a swipe (11-29)
Fix - Landscape orientation issues in third party themes (11-29)
Themes
New - Added Mi Note 2 custom theme (12-01)
Gallery
New - "People who look alike" in Gallery (11-29)
Music
New - Share playlists using WeChat (11-29)
Optimization - Layout adjustments (11-29)
Market
Optimization - Apps sorted by frequency before they are deleted (11-29)
Security
New - Game speed booster in the settings (11-29)
New - Game speed booster recommends popular games when it's opened for the first time (11-29)
Optimization - Couldn't boost some games (11-29)
Optimization - Animations for icons (11-29)
Fix - Game speed booster FC issues (11-29)
Fix - Game booster still saved battery after users left the game (11-29)
Fix - Game booster still worked after users left the game (11-29) 

Status: Stable

Bugs: Let Me know if you find anything.

Download Here!

[Link ##download##]

All Credits are to:
-Janric Vicedo (The One Who Originally Port This!)
-MIUI
-Knight Owls Porting Assassins
-MultiROM
-Redmi Note 2

[ROM] MIUI 8 6.11.24 For Firefly Intense Desire [MT6753]

[ROM] MIUI 8 6.11.24 For Firefly Intense Desire [MT6753]

Highlights:
New - Swipe to delete Lock screen notifications (11-18)
New - Home screen settings added to the Settings (11-22)
New - All-new playlists (11-22)
Optimization - Redesigned content layouts (11-22)
System
Optimization - NFC battery issues (11-23)
Optimization - Fingerprint recognition accuracy (11-23)
Fix - Volume in earphones was too high for ringtones and notifications (11-23)
Messaging
Optimization - Verification codes are highlighted among unread notifications (11-22)
Optimization - Delivery company names are displayed on the cards (11-22)
Lockscreen, Status Bar, Notification Bar
New - Swipe to delete Lock screen notifications (11-18)
New - Fingerprint can be used as the Privacy protection password (11-21)
Optimization - UI adjustments for screen lock, password, and fingerprints (11-21)
Home screen
New - Home screen settings added to the Settings (11-22)
Music
New - All-new albums (11-22)
Optimization - In-app downloads (11-22)
Backup
Fix - Mi Mover FC issues (11-22)
Weather
Optimization - Redesigned content layouts (11-22)
Fix - Status bar and Home screen couldn't monitor updates (11-22)
Fix - High battery consumption on standby in Airplane mode (11-22)
Fix - FC issues in some cases (11-22)
Settings
Optimization - Alerts for factory data reset to avoid unintentional data loss (11-18)
MI Wallet
New - WeChat payments for Mi Credits (11-22)
Fix - Mi Pay logo adjustments (11-22) 

Status: Stable

Bugs:
- (?)

Download Here!

[Link ##download##]

All Credits are to:
-Janric Vicedo (The One Who Originally Port This!)
-MIUI
-Knight Owls Porting Assassins
-MultiROM
-Redmi Note 2