Upgrading Tools & Tutorial for Action Chip Android Tablet Pc

Firmware Upgrade Tool for

 ACTION CHIPSET

 (ATM7021+ATM7029+ATM7039) 

 , CPU,BOXCHIP,MAIN CHIP  for Android Tablet PC

Read Article about Actions_Semiconductor

Before flashing,upgrading tablet pc must match your Tablet PC firmware and download the complete (.img) file which will use to flash your android tablet with the help of Action tablet flashing tool.

Here is complete tutorial to flash Action Chip based Android Tablets . 

Download Flashing Tool for ACTION CHIPSET  

Action Tablet Product Tool 1.02-02(Developer Edition)

Extract and Run MSI file 

This Software is in chinese. Click next to continue . 

Click {"下一步(N)" } button to Continue if you want to change the location then you can change the directory .

Click Next , the dialogue box might appear . Select 1st option to continue , if not then select 2nd option.

When installation Complete click finish button to close the dialog box.

Go to directory folder where you have extract the software.

Select Mainapp 

After Opening MainApp you will have the complete view of Action Tablet tool . Please read carefully and  follow the following steps to replace the files with the matched one.
marked 1 to 5 in the picture in red box to make the following comments . 
Click to select the "Recovery" file in the firmware folder
Click to select the "Fat_Misc" file in the firmware folder
Click to select the "System" file in the firmware folder
Click to select the "apk.img" file in the firmware folder
Click to select a file whose suffix name is "FW" in the firmware folder.

Now its time to connect you Android tablet pc with Computer. Here is little method how to put your tablet in recovery mode from where computer will recognize it and make it ready for Firmware Restore or upgrade. 
Turn off your Android Tablet . Hold down Volume (+ UP) button for few seconds and insert usb cable in Tablet . Computer will inform you "usb device found " . 
Manually install drivers by opening ---->Right click on my computer---->Properties--->Unknown device.
Right click on unknown device and install drivers.  

After installing device will be shown in PC properties. click confirm to start uploading drivers to PC.

When device is connected pop up window will be open and tell you 1 usb device is detected. 

 

When you see the above software condition on your computer you are ready to upload tablet firmware.
Now click on download to upgrade . 

After click on download button as shown in picture wait for 5 minute to complete the upgrade process. 

When following picture show up its mean you are Done.  

 Things to Remember before flashing Android Tablet. 
Charge Tablet PC battery more than 60%. Power failure during installing / upgrading android tablet may result in dead tablet. 
Upgrade process take some time depend on device . Do not panic just sit relax. 


Related Posts.

Upgrading Tablet Android firmware with Micro SD Card Tutorial.
How to Unbrick your Bricked Android Tablets
How to Recognize Tablet Official Firmware or Generic Rom or Board ID
LIVESUIT FLASHING TOOLS & TUTORIALS
Allwinner A10 A13 Tablet Touch Fixer by UnitedGSM.
Allwinner A10/A13 Tablet firmware backup script/tool
How to Install CyanogenMod on HP Touchpad step by step Guide and Tutorial.

How to flash or restore Android Tablets tutorial for newbies

Basic Training to Learn how to  flash ,Restore ,Upgrade ,Root ,all Android Tablets .Learn how to flash Android Tablet Pc.

This tutorial is specially for  newbies , 

There are few basic steps which is compulsory to start  flashing procedure for android tablets . A very basic steps which will allow you to flashing Tablets safely and smoothly . before starting you must install the drivers for tablets to let the computer know that device is connected. 

To install driver for android tablets, you must :

1. Make sure battery is up-to 60 % Charge.

2.Turn off your tablet .

3.Press and hold Volume Down "Volume -" button and insert USB cable which is already connected to your pc . 

4.While holding Volume down button press power button for 1 sec and release then press power button again for half sec and keep pressing it for half second until your computer recognize the tablet pc. 

5. For WIN XP user must install the Android Drivers in case of WIN 7 More then 50% devices drivers are available in WIN 7 , but in case no driver found or window take a lot of time to searching for drivers you must install manually . 

6. When device is connected go to properties of  My computer -->Hardware -->Device Manage  and make sure your tab is connected in USB Controller.

7. Make sure and done . Now you are ready to install complete firmware for your Tablet. 

Tablets with Allwinner Chipset flashed with Livesuit flashing tools and Tablets based on Rockchip must be flashed with Rkbatch Tool.

Note : In case of Device does not recognize by Pc  . Change the USB port . Restart your Computer or remove USB cable and try to turn on your android tablet simply (normal mode) and reconnect the cable .